15W Series AC/DC wall mounted power adapter

The power adapter is 15W wall mounted?type adapter series .This product is adopting the input range from 100VAC to 240VAC and supplies output voltage between 3VDC and 24VDC that can satisfy the demands for various types of DC consumer electronic devices.You can select a different AC pin (U.S., EU, UK, AU, ?Argentina) and Varied DC plug to meet custom request.The effiency is not lower than 70% and designed accordion to UL/CE/FCC safty regulations.


  • Universal?Input 100-240 VAC
  • Output with Low Ripple Noise
  • Efficiency 70%min
  • Class II power
  • Protections:Short circuit/Overload/Over voltage
  • Fully enclosed plastic case
  • 100% full load burn-in test
  • CE/FCC and RoHS Certified
  • Plug-in?Style / Non-vented Case
  • Case Dimension (L*W*H mm): 60.8*35.6*43.4
  • Modified and Custom Design Available
  • 2 years warranty

Input Characteristics

  • Input Voltage: 100~240V AC
  • Input Voltage Range: 90-264VAC
  • Rated Input Frequency: 50Hz or 60Hz single phase.
  • AC Input Frequency Range: 47Hz to 63Hz

Output Characteristics

  • Rated Voltage:3V~24V optional
  • Output voltage regulation precision: ±5%
  • Loading regulation: ±1%
  • Ripple :1% Vp-p max.
  • Transient Response :0.5ms for 50% ? Load Change Typical
  • Protection:Fold back Overcurrent Protection; Short Circuit Protection

Environmental Conditions

  • Operating temperature: 0℃~40℃
  • Operating humidity: 20%~ 90% (Relative humidity).
  • Storage temperature: -20℃ ~ 70℃ .
  • Storage humidity: 5%~ 95% . (Relative humidity).
  • Cooling:By natural air flow


  • Dielectric Withstand Voltage ( HI-POT ):
    2pin primary to secondary 3000Vac 5mA 1min
    3pin primary to secondary 1500Vac 5mA 1min

Safety Approvals:

CE /RoHS Certified and Designed according to UL/ standards


  • MTBF (Mean-Time-Between-Failures) Calculation: MTBF shall be 50K hours of continuous operation at 20℃, maximum load and normal voltage
  • MTBF Verification: The MTBF shall be verified from life testing performed by factory Quality Department. The operating conditions are: 40℃ ambient temperature , sea level , both nominal line voltage ranges (230Vac) and a minimum load of 70% of the maximum load.

Consumer electronic devices,Telecommunication devices,Office facilities,Industrial equipments.